Activation of a non-eruptive well by using an electrical pump to optimise production
The purpose of the study is to activate a well named X (for confidential reasons) in order to improve its production by proposing an electrical submersible pump. The nodal analysis is performed to understand the well’s condition and an economic evaluation is done to determine the applicability of the project. The initial completion data, the pump placement data and the economic data are considered and used as input in PIPESIM 2017 software for operations and simulations. The results obtained from nodal analysis show that the well is in a total depletion situation. Upon analysis, the electrical submersible pump type REDA S6000N with operational diameter of 5.38 inches is appropriately chosen and installed, resulting in a flowrate of 4,891.36 stock-tank barrels per day (stb/d) with a bottom pressure of 2,735 pounds per square inch (psi). A flowrate of 5,000 stock-tank barrels per day at a pressure of 2,707 psi is obtained after optimisation of the pump through sensitivity curves. The economic balance sheet presents a net present value of USD 110,718,250, showing the profitability of the project over a period of one year.
Michael J. Economides and Curtis Boney, “Reservoir stimulation in petroleum production”, Reservoir Stimulation (3rd edition). John Wiley & Sons, 2000.
B. Guo, W.C. Lyons and A. Ghalambor, Petroleum production engineering: A computer-assisted approach. Gulf Professional Publishing, 2007. DOI: 10.1016/B978-0-7506-8270-1.X5000-2.
S. John, Forecasting oil and gas producing for unconventional wells, 2nd edition., Petro. Denver, 2018.
R.S. Seright, “Gel propagation through fractures,” SPE Production & Operations, Vol. 16, No. 4, pp. 225 - 231, 2001. DOI: 10.2118/74602-PA.
Lei Zhang, Nasir Khan, and Chunsheng Pu, “A new method of plugging the fracture to enhance oil production for fractured oil reservoir using gel particles and the HPAM/Cr3+ system”, Polymers, Vol. 11, No. 3, 2019. DOI: 10.3390/polym11030446.
Xiangming Jiang, Guosheng Zheng, Wanghua Sui, Jiaxing Chen, and Jinchuan Zhang, “Anisotropic propagation of chemical grouting in fracture network with flowing water”, ACS Omega, Vol. 6, No. 7, pp. 4672 - 4679, 2021. DOI: 10.1021/acsomega.0c05393.
Frak Jahn, Mark Cook, and Mark Graham. Hydrocarbon exploration and production, 2nd edition. Elservier Science, 2008.
Guy Valchon and Terry R. Bussear, “Production optimization in ESP completions with intelligent well technology”, SPE Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, Indonesia, 5 - 7 April 2005. DOI: 10.2118/93617-MS.
Abdullah Al Qahtani, Mubarak Al Qahtani, and Balder Al Qahtani, "Development of a novel solution for multiphase flow metering in ESP-lifted wells", Abu Dhabi International Petroleum Exhibition & Conference, Abu Dhabi, UAE, November 2020. DOI: 10.2118/203480-MS.
Matthew Amao. "Electrical Submersible Pumping (ESP) Systems", Artificial Lift Methods and Surface Operations PGE 482, 09 March, 2014.
Jonathan Bellarby, Well completion design, 1st edition. Elsevier, 2009.
G. Takacs, “Evaluation of ten methods used for prediction of pressure drop in oil wells”, Erdöl erdgas kohle, Vol. 94., No. 4, pp. 146 - 149, 1978.
E. Khamehchi and M.R. Mahdiani, Gas allocation optimization methods in artificial gas lift. Springer, 2017. DOI: 10.1007/978-3-319-51451-2.
A. Davarpanah and B. Mirshekari, “Experimental study and field application of appropriate selective calculation methods in gas lift design”, Petroleum Research, Vol. 3, No. 3, pp. 239 - 247, 2018. DOI: 10.1016/j.ptlrs.2018.03.005.
M. Amao, “Electrical submersible pumping systems”, King Saoud University, 2014.
Schlumberger, “ESP design and technology”, 2002.
Total, “Le puits activé par pompage centrifuge immergee”, 2007.
W. Palen and A. Goodwin, “Increasing production in a Mature basin: The choke model”, European Petroleum Conference, Milan, Italy, SPE - 36848 - MS, 22 - 24 October 1996. DOI: 10.2118/36848-MS.
N.B. Alias, “A study of production optimization using prosper”, Final year project, Universiti Teknologi Petronas, 2012.
1. The Author assigns all copyright in and to the article (the Work) to the Petrovietnam Journal, including the right to publish, republish, transmit, sell and distribute the Work in whole or in part in electronic and print editions of the Journal, in all media of expression now known or later developed.
2. By this assignment of copyright to the Petrovietnam Journal, reproduction, posting, transmission, distribution or other use of the Work in whole or in part in any medium by the Author requires a full citation to the Journal, suitable in form and content as follows: title of article, authors’ names, journal title, volume, issue, year, copyright owner as specified in the Journal, DOI number. Links to the final article published on the website of the Journal are encouraged.